10.1 inch TFT Display, incorporating EDT Smart Embedded GUI Module with TouchGFX Software. 850cd/m2; MCU-STM32H750; Flash-64MB; SDRAM-16MB; PoE; Add-On-Board
Please Call for Availability
Warning: Last items in stock!
|Display Mode||1024 (RGB) x 600 Resolution|
|Overall Dia. (W x H x D mm)||235.50 x 143.00 x 12.30|
|Active Area (W x H mm)||222.72 x 125.28|
|Backlight Brightness||850 cd/m2|
|Backlight Lifetime||30K Hours|
|Interface Mode||SPI, I2C, RS232, RS485, CAN BUS, GPIO|
|Operating Temperature||-20 to 70 deg. C|
|Storage Temperature||-30 to 80deg. C|
|Viewing Direction||6 O'clock|
. No Cover LensEDT Smart Embedded® products enable the user to add a modern GUI with high-end graphics and smooth animation to any system without the overhead of memory and power demanding operating system.
The controller board is integrated with the display as one compact module. It includes all necessary circuits to control the TFT display module, backlight, PCAP Touch sensor and the GUI application, and a custom-designed Cover Lens can be added to give each customer product a unique expression.
The Graphic framework is based on TouchGFX and FreeRTOS which gives high efficiency and low power solution with very little overhead for running the Graphic User Interface.
EDT Smart Embedded® Display solution is the Clear Choice due to Lower cost of ownership and shorter time to market.
This series of highly integrated modules is intended to be used as Intelligent Display Modules with Capacitive Touch panel and Integrated Driver board with MCU, Memory, and a number of interfaces.
The MCU used is the STM32H750 series ARM Cortex M7 processors from STMicroelectronics with integrated TFT Controller and a variety of Interface’s.
As Standard, the Modules comes with a wide range Power Supply input of 7 to 36 Volt.