ETEM043005XDH6. 4.3" Smart Embedded GUI Module, 380nits

ETEM043005XDH6

4.3 inch TFT Display, incorporating EDT Smart Embedded GUI Module with TouchGFX Software. MCU-STM32F746; Flash-16MB; SDRAM-8MB

More details

Data sheet

Display Mode480 (RGB) x 272 Resolution
Overall Dia. (W x H x D mm)105.50 x 67.20 x 10.35
Active Area (W x H mm)95.04 x 53.85
Backlight TypesLED
Backlight ColoursWhite
Backlight Brightness380cd/m2
Backlight Lifetime30K Hours
Interface ModeSPI, I2C, RS232, RS485, CAN BUS, GPIO
Diagonal4.30 inch
LCD TypeTN
Operating Temperature-20 to 70 deg. C
Storage Temperature-30 to 80deg. C
Polarizer ModesTransmissive
Viewing Direction6 O'clock
ControllerHycon HY4614

More info

EDT Smart Embedded® products, enables the user to add a modern GUI with high-end graphics and smooth animation to any system without the overhead of a memory and power demanding operating system.

The controller board is integrated with the display as one compact module. It includes all necessary circuits to control the TFT display module, backlight, PCAP Touch sensor and the GUI application and a custom designed Cover Lens can be added to give each customer product a unique expression.

The Graphic framework is based on TouchGFX and FreeRTOS which gives a high efficiency and low power solution with very little overhead for running the Graphic User Interface.

EDT Smart Embedded® Display solution is the Clear Choice due to Lower cost of ownership and shorter Time to market.

This series of highly integrated modules is intended to be used as Intelligent Display Modules with Capacitive Touch panel and Integrated Driver board with MCU, Memory and a number of interfaces.

The MCU used is the STM32F746 series ARM Cortex M7 processors from STMicroelectronics with integrated TFT Controller and a variety of Interface’s .

As Standard, the Modules comes with a wide range Power Supply input of 7 to 36 Volt.

Download Specification.

18 other products in the same category: