EVK070006B. 7" Smart Embedded Eval Kit, 350nits


7-inch Evaluation Kit, incorporating EDT Smart Embedded GUI Module with TouchGFX Software. 350cd/m2; MCU-STM32F746; Flash-16MB; SDRAM-16MB.

More details

Data sheet

Display Mode800 (RGB) x 480 Resolution
Overall Dia. (W x H x D mm)165.00 x 104.44 x 11.50
Active Area (W x H mm)152.40 x 91.44
Backlight TypesLED
Backlight ColoursWhite
Backlight Brightness350 cd/m2
Backlight Lifetime30K Hours
Interface ModeSPI, I2C, RS232, RS485, CAN BUS, GPIO
Diagonal7.00 inch
Operating Temperature-20 to 70 deg. C
Storage Temperature-30 to 80deg. C
Polarizer ModesTransmissive
Viewing Direction6 O'clock

More info

EDT Smart Embedded® products enable the user to add a modern GUI with high-end graphics and smooth animation to any system without the overhead of memory and power demanding operating system.

The controller board is integrated with the display as one compact module. It includes all necessary circuits to control the TFT display module, backlight, PCAP Touch sensor and the GUI application, and a custom-designed Cover Lens can be added to give each customer product a unique expression.

The Graphic framework is based on TouchGFX and FreeRTOS which gives a high efficiency and low power solution with very little overhead for running the Graphic User Interface.

EDT Smart Embedded® Display solution is the Clear Choice due to Lower cost of ownership and shorter Time to market.

This series of highly integrated modules are intended to be used as Intelligent Display Modules with Capacitive Touch panel and Integrated Driver board with MCU, Memory, and a number of interfaces.

The MCU used is the STM32F746 series ARM Cortex M7 processors from STMicroelectronics with integrated TFT Controller and a variety of Interface’s.

As Standard, the Modules comes with a wide range Power Supply input of 7 to 36 Volt.

Evaluation Kit Contents:

  • Smart Embedded module with integrated neutral oversized cover lens.
  • ST-Link to connect Windows PC USB port to upload Smart Embedded module software.
  • Interface cables and connectors for the power supply.
  • Power Supply will be provided separately.

Download Specification.

7 other products in the same category: